Tweet
Is there a way to lower a Z06 C8 with the nose lift? I was told that the max lowering is 3/8th inch since apparently the C8 Z does not have lowering bolts. Is this true. Has anyone else been able to lower their Z a bit more perhaps around 3/4 inch?
-
-
I made a mistake. I meant was there any way to lower a c8 Z without the nose lift by more than 3/8 inch. -
Yes there is. I would contact Ciocca Performance or Paragon Performance and they will explain the options you have. I believe there are three of them for a Z06 with the front lift option.2023 Z06: Elkhart Lake Blue, 2-tone blue interior, HTC, Standard Z06 with Z07 aero pkg, CCB’s, 3LZ, E60, every visible carbon fiber option including wheels, Jake Design Pkg. Lifetime, annual contributors, and 25 year NCM members. Home is the beautiful Pacific Northwest.Comment
-
John
I meant lowering without the front lift.Comment
-
Removing the air in your tires should do it! And it's free! (sorry, I couldn't resist)Comment
-
Did you look to see if the Z06 doesn't have the lowering bolts?2023 Z06 Red Mist HTC Red Calipers / C-Flash Mirrors and Spoiler / Black Exhaust Tips / Front Lift / Black 3LT / CF 1 Interior / Stealth Trim / Red Belts and Stitching.
Red Mist C8 Z51 traded for his big brother
Atomic Orange C6. Plenty of engine and suspension mods. Gone, but not forgotten
Member, Old Dominion Corvette Club https://www.olddominioncorvetteclub.org/Comment
-
There are no lowering bolts on c8z or any c8, that was on c7Thanks,
Steve
Just received my 2023 Z06 June1 2023
-------------------------------------------------------------------------------------------
Changed my build from z07 to z06 on 4-21-2023, order accepted status 4200 as of 5-30-2023. Will be Hypersonic Gray HTC Built 5-22-23, received June 1 2023
-------------------------------------------------------------------------------------------Comment
-
2023 Z06 Red Mist HTC Red Calipers / C-Flash Mirrors and Spoiler / Black Exhaust Tips / Front Lift / Black 3LT / CF 1 Interior / Stealth Trim / Red Belts and Stitching.
Red Mist C8 Z51 traded for his big brother
Atomic Orange C6. Plenty of engine and suspension mods. Gone, but not forgotten
Member, Old Dominion Corvette Club https://www.olddominioncorvetteclub.org/Comment
-
Yes you just need the spanner wrenches. Fairly easy diyThanks,
Steve
Just received my 2023 Z06 June1 2023
-------------------------------------------------------------------------------------------
Changed my build from z07 to z06 on 4-21-2023, order accepted status 4200 as of 5-30-2023. Will be Hypersonic Gray HTC Built 5-22-23, received June 1 2023
-------------------------------------------------------------------------------------------Comment
-
Lowering without the front end lift is super easy. You just need the coil over wrenches sold by Paragon Performance. You can watch this video here to see how to do it. The process is the same in the front as it is in the rear if you do NOT have a front end lift.
Check out my YouTube channel for all kinds of Corvette content:
www.youtube.com/horsepowerobsessedComment
Comment