MECF_728x90_top

Collapse

Announcement

Collapse

Corvette Today” Podcast Interview Justin of HorsePower Obsessed On Now

Steve Garrett delves into the world of YouTube re Corvettes for the first time! He speaks to Justin from HorsePower Obsessed. Learn how people make money on YouTube, hear about Justin's 2019 Black ZR1 Big Wing, and about the C8 he has on order. And also hear about Steve's C7 Stingray Carbon Fiber Edition Corvette. For current and past podcast links: https://www.midenginecorvetteforum.c...-available-now
See more
See less

Details of C8 Body Structures Thanks To Composites World

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Details of C8 Body Structures Thanks To Composites World



    Originally posted by CompositesWorld
    Composites-intensive masterwork: 2020 Corvette, Part 1

    Click image for larger version  Name:	636A09C7-FC29-49A7-9B0F-9357E4E17FA0.jpeg Views:	0 Size:	103.3 KB ID:	157585


    Eighth-generation vehicle sports more composites, and features parts produced using unique materials and processes.

    #weaving #discontinuousfiber #outofautoclave


    PEGGY MALNATI

    Contributing WriterSHARE



    Design results of the mid-engine Corvette. Source | Sue Kraus

    The much-anticipated eighth-generation Chevrolet Corvette (C8) from General Motors Co. (GM, Detroit, Mich., U.S.), which has been generating accolades since its official reveal on July 18, 2019, began commercial production earlier this year. The new Corvette Stingray convertibles and coupés are notable not only for their beauty and the fact that GM has produced a high-performance, street-legal, mid-engine rocket ship starting at less than $60,000 USD — one-third the price of comparable-performance mid-engine cars — but they also sport an impressive array of new and genuinely innovative composites content, which we’ll describe here and in Part 2 next month.

    New engine configuration changes everything

    GM engineering went into preliminary design knowing they’d be working on a mid-engine vehicle — the first production Corvette in eight generations to sport that configuration. “We evolved the front-engine architecture as far as we could for performance, so shifting to a mid-engine design was the next logical step to improve an already great car and be the segment leader,” explains GM’s Tadge Juechter, executive chief engineer-Global Corvette. Equipped with the Z51 performance package, the 2020 Corvette Stingray can accelerate 0-60 mph (0-97 kmh) in 2.9 seconds and reach top speeds of 194 mph (312 kmh). Pushing the engine toward the vehicle’s rear affected many things, including the car’s center of gravity, the relative position of occupants, transmission location and design of underbody panels and trunk storage. The mid-engine design also introduced higher operating temperatures and noise to new areas of the car.


    The eighth-generation Chevrolet Corvette — all eight generations (C1-C8) shown above, left to right respectively — from General Motors Co. started production earlier this year. This mid-engine sports car is not only impressively fast, and the most composites-intensive Corvette yet, but it features an array of genuinely innovative composites applications. Source | General Motors Co.

    “Because of the mid-engine, we had to do things differently,” explains Ed Moss, Corvette body structure engineering group manager. “From the start, we had so many discussions about how to lay out the body structure. At one point, everything was on the table as we discussed the best way to design and build each system. For example, we debated metallic versus composite for wheelhouses. If we’d kept the C7’s composite wheelhouses, we’d have to bond to the hinge pillar [A pillar], which is immediately adjacent to the front wheel in a mid-engine vehicle, leaving very little package space. We went with metal there. We even briefly discussed metal versus composite body panels. However, it would’ve been economically infeasible to create the C8’s styling lines in metallics.”

    “A real challenge we faced was how to handle air induction,” recalls Chris Basela, Corvette body structure lead engineer, explaining the need for a different method to funnel cooling air into and across the naturally aspirated, 495-horsepower, 6.2-liter V8 engine, which generates 470 foot-pounds (637 Newton-meters) of torque. “We tried all kinds of designs that forced air to take really torturous paths, creating eddies and flows we didn’t want. It took lots of iterative work with the powertrain team to develop the best path for airflow because the car needs to breathe freely with no restriction. We also needed access to the air box and had to work around rear trunk space. Another issue was heat and engine noise in the passenger compartment, because occupants no longer sit behind the engine but are positioned directly in front of it. And we were especially conscious of cabin air quality as laws had changed in Europe and elsewhere since the C7, so we worked really hard to reduce VOCs [volatile organic compounds].”

    “Even working out how to assemble the car was a challenge,” adds Moss. “With a front-engine design, you have a long hood and large engine compartment, providing operators plenty of room to build the car from inside the compartment, even with the front bumper beam already welded on. On the mid-engine Corvette, with its very short front clip, we keep the front of the car open as the vehicle is built out, then bolt on the front bumper.”

    “It was quite a balancing act to get the proper shapes, while ensuring our suppliers could produce the parts and our team in Bowling Green [GM’s Kentucky-based Corvette assembly plant] could assemble them,” continues Basela. “In the end, there was only one carryover composite from the C7’s body to the C8.” This was tough Class A, 1.2 specific gravity (SG) sheet molding compound (SMC) developed for the 2016 Corvette and used in a variety of exterior closures on the new vehicle.

    Vehicle architecture

    For four generations (C5-C8), Corvettes have featured a three-layer, multi-material body structure: the frame, usually a mix of aluminum or steel — this time with a carbon fiber-reinforced composite (CFRP) part; the body structure, which is largely bonded composite to capitalize on design and manufacturing flexibility; plus bolt-on closeouts (body panels), which have been composite since Covette’s June 1953 debut. This layered hybrid structure not only provides affordable lightweighting in high production volumes — particularly for cars of this performance class — but also permits multiple vehicle variants to be produced at low tooling investment. In fact, for the current C8, GM managed to produce all Class A composite body panels (bonded inners and outers) on both the base model coupé and convertible using just 20 tools.


    GM and its suppliers have already won many awards for innovative composites use on the 2020 Corvette Stingray. Among those standing above are key GM engineering team members at last November’s 49th annual Automotive Innovation Awards Gala, where GM won SPE Automotive Div.’s Vehicle Engineering Team Award. A number of composite parts on the vehicle also were finalists or category winners at the event. Source | SPE Automotive Div.

    In addition, Corvettes have always been engineered with an open-roof architecture, regardless of whether they are actually convertibles or coupés with fixed or removable roof panels. Because open-roof vehicles are generally less stiff than those with fixed roofs, an important focus for each Corvette’s engineering is always to create the stiffest foundation possible to improve suspension and steering. Historically, tunnels(housing transmissions and driveshafts on front-engine vehicles) have dominated Corvette body structures and have been key enablers for achieving high torsional rigidity. In the case of the new Corvette, GM achieved even higher rigidity. With the roof removed, the C8 body is 53.78% stiffer than a benchmark high-performance mid-engine competitor, 29.27% stiffer than a second high-performance mid-engine competitor, and 13.79% stiffer than the C7. Two composite parts made important contributions to vehicle stiffness—one directly attached to the frame structure (rear bumper beam) and another attached to the underbody (lower tunnel closeout).

    Frame structure

    The C8’s frame is largely aluminum alloy with one CFRP part developed to meet GM’s stringent dollar-per-kilogram targets. In contrast, the C7 frame was all-aluminum and the C6 was mostly steel.

    The only composite part directly mounted to the frame that travels with the body-in-white (BIW) through the electrophoretic rust-coat process (which GM calls ELPO), is a unique CFRP rear bumper beam. This part helps stiffen the frame and contributes to rear-impact performance. Its curved shape — possible thanks to a novel process called radius pultrusion developed by Thomas GmbH + Co. Technik + Innovation KG (TTI, Bremervörde, Germany) — enables it to match rear styling cues and fit in limited package space while maintaining dimensional integrity close to engine-bay heat. As the auto industry’s first curved pultruded part (see our full feature on this part in the CW May 2020 issue), the hollow, two-chambered beam was produced by Shape Corp. (Grand Haven, Mich., U.S.) on equipment developed and built by TTI. The beam weighs just 1.3 kilograms and features a bonded/bolted tow-hook eye capable of 25 kilonewtons of pull-out force.

    An auto industry first, the 2020 Corvette sports a curved rear bumper beam in pultruded carbon fiber composite produced with 87 individual carbon tows and eight carbon fiber non-crimp fabrics (NCFs) impregnated with polyurethane-acrylate resin. The hollow, two-chambered beam is 66% lighter than the outgoing aluminum beam and met GM’s demanding dollar-per-kilogram targets. Source | Shape Corp.

    Body Structure: part A

    Virtually all of the C8’s body structure components are composite and are bonded and/or bolted to the frame after the latter undergoes ELPO. Notable composite parts at this level include structural underbody closures and the floor — which we’ll cover in this issue — and front and rear trunks, induction ducts and the rear surround and bulkhead — which we’ll cover, along with body panels and trim, next month.

    This hybrid-composite, lower-tunnel closeout is produced using a variant of liquid compression molding. It eliminated secondary attachments, lowered mass by 3 kilograms and reduced labor, tooling and capital costs vs. aluminum. Source | SPE Automotive Div.

    The removable lower-tunnel structural closeout on the C8, which acts as an access door, contributes more than 10% of the vehicle’s torsional rigidity and acts as a primary load path during a crash. This hybrid-composite panel consists of three layers of glass fiber preform. These consist of continuous/woven and chopped/random fibers at 38% fiber volume fraction (FVF), with veils added to top and bottom face layers on each stack for improved surface finish. Glass preforms are interleaved with two layers of preforms made using Toray (Tokyo, Japan) T700 12K standard-modulus carbon fiber in the form of NCF biaxial fabric at 21% FVF and a vinyl ester (VE) matrix. The closeout is produced by Molded Fiber Glass Co. (MFG, Ashtabula, Ohio, U.S.) using its proprietary PRiME (Prepositioned Reinforcement ensuring Manufacturing Excellence) process, a type of liquid compression molding (LCM).

    Aside from a single aluminum closeout near the rear wheels that is part of the engine cradle, the remaining underbody panels consist of either compression molded SMC or injection molded thermoplastics. Among other benefits, these panels reduce underbody turbulence and drag, improve fuel efficiency and keep moisture, dust and stones out of the vehicle’s engine and driveline. Further, they provide the dimensional foundation for multiple exterior and interior interfaces.

    The low-density but structural SMC panels feature new formulations (in this case, 40% FVF chopped fiberglass/unsaturated polyester (UP) resin) developed by MFG. The material is called “float” SMC because each panel’s density is less than 1.0 (average SG=0.97) and thus can float in water. MFG produced all structural SMC and LCM’d parts on the car.


    An important contributor to vehicle lightweighting on the C8 is the extensive use of “float” SMC. With specific gravity values less than 1.0, this low-density but structural SMC developed by MFG is used in a variety of non-Class A parts, including underbody panels, the dash panel, air-induction ductwork and the front trunk. Source | Molded Fiber Glass Co.

    The vehicle also sports a hybrid floor optimized for torsional bending and side-pole impact protection (engaging the rocker panels and tunnel, to which it is joined). Floor panels feature cabin-facing stamped aluminum bonded to sheets of road-facing 1.5-SG composite (60 wt-% continuous and woven glass fiber/VE) produced via the PRiME process. Before heat-bonding both layers with Pliogrip 9100 polyurethane structural adhesive from Ashland Global Holdings Inc.(Wilmington, Del., U.S.), MFG cleans and preps the materials.

    All composite parts directly bonded to the C8 frame are first subjected to laser ablation, a process developed by GM, MFG and Adapt Laser Systems LLC(Kansas City, Mo., U.S.) for the 2016 Corvette, and adapted from a composites industry method for mold cleaning. Laser ablation replaces hand sanding and reduces labor, time and cost, eliminates dust and improves repeatability. Laser path, angle of attack and energy level are customizable for each part’s material and geometry. To maximize manufacturing flexibility, the entire underbody, including the floor, is connected to the frame and itself via bonding and screws.

    In the August issue of CW, we’ll continue covering composites innovation on the new Corvette, resuming with additional components at the body structures level and finishing with exterior closures (body panels), plus additional trim and upgrades.
    https://www.compositesworld.com/arti...orvette-part-1
    GBA Black; HTO Twilight/Tension interior; Z51 & Mag Ride; E60 lift; 5VM visible carbon fiber package; 5ZZ high wing; FA5 interior vis CF; ZZ3 engine appearance; 3LT; Q8T Spectra Gray Tridents; J6N Edge Red Calipers; SNG Edge Red Hashmarks; VQK Splash Guards; RCC Edge Red engine cover; VJR illuminated sill plates.Lifetime, annual contributors, and 22 year members of National Corvette Museum. Home is the beautiful Pacific Northwest.

  • #2
    outstanding diagrams 👍

    Comment


    • #3
      Fantastic info, thanks John!
      Vette's owned: 99 Sebring Silver Convert - 10yrs, 2008 Crystal Red Convert,w/cam, longtubes and Vortech supercharger. C8 ordered from Kerbeck, VIN 00336 built on 2/10/20 - Delivered 3/18/20 C8 Spec: Torch Red 2LT, Z51, FE4, E60, CF7, FA5, AH2, HUL, J6E, TU7, 3F9, Q8P, 5ZU, R8C

      Comment


      • #4
        John -

        Thanks for this post! Having taken a C3 down to the last nut and bolt and putting it back together again, it's great (and a little shocking) to see how far technology has advanced in 30+ years. If you think about it the C2 and C3 (1963 thru 1982) the mechanicals were basically the same. Yes, there were additions like disc brakes, etc., but the chassis config didn't change much.

        This is the first in depth look/description I've run into, so again, Thanks!

        Kelly


        Deposit in (7/19) Order in (8/19) Order awaiting changes pending decisions on 2020/2021 model year changes

        Comment


        • #5
          Grazie John, love this stuff/ info!!!

          Comment


          • #6
            Well presented. This reassures that the C8 is the preeminent value proposition.

            Comment


            • #7
              I continue to learn more and more.

              Comment


              • #8
                Thanks for posting this!

                Comment


                • #9
                  Thanks John. Really enjoyed the new technology that I will be driving in the fall. HTC TPW 8/17 R8C

                  Comment


                  • #10
                    I too love to learn more about engineering, components, and assembly. I worked on an OEM auto assembly line but that was in the dark ages (even before the C3), and having taken over 30 tours of BGA during the C7 era, I can not wait to have my first C8 tour.
                    GBA Black; HTO Twilight/Tension interior; Z51 & Mag Ride; E60 lift; 5VM visible carbon fiber package; 5ZZ high wing; FA5 interior vis CF; ZZ3 engine appearance; 3LT; Q8T Spectra Gray Tridents; J6N Edge Red Calipers; SNG Edge Red Hashmarks; VQK Splash Guards; RCC Edge Red engine cover; VJR illuminated sill plates.Lifetime, annual contributors, and 22 year members of National Corvette Museum. Home is the beautiful Pacific Northwest.

                    Comment


                    • #11
                      Very impressive, Thanks John. Everything you could possibly want to know and then some.

                      Comment


                      • #12
                        Wow! Thanks John. Its truly impressive to see this amount of technology being delivered at scale. They not only conceived a great platform, but also designed it for optimal 'high' volume manufacturing production - in all its variants. That's no mean feat. Very, very impressive.

                        Comment


                        • #13
                          Love these kinds of articles. They really show just how complex automotive design and manufacturing are these days. A long way away from welding some steel together to make a frame and then bolting everything else to that.
                          Last edited by meyerweb; 06-23-2020, 06:55 PM.
                          SunKissed, my 2015 2LT, 7MT, Black over Daytona Sunrise Orange Metallic, Stingray convertible (One of about 40)

                          Purchased 5/2/2015,
                          >36,000 miles

                          Proud member of the Old Dominion Corvette Club. Check us out http://www.olddominioncorvetteclub.org

                          Never grow up - It's a trap.

                          Comment


                          • #14
                            Unbelievable thanks for sharing John

                            Comment


                            • #15
                              Credit for this article properly goes to co-MECF owner and Mr. CorvetteBlogger Keith Cornett who alerted me to this great article early this morning. He and I talk back and forth several times most days, sending each other links and tips often, but credit for this one is solely deserving to Keith.
                              GBA Black; HTO Twilight/Tension interior; Z51 & Mag Ride; E60 lift; 5VM visible carbon fiber package; 5ZZ high wing; FA5 interior vis CF; ZZ3 engine appearance; 3LT; Q8T Spectra Gray Tridents; J6N Edge Red Calipers; SNG Edge Red Hashmarks; VQK Splash Guards; RCC Edge Red engine cover; VJR illuminated sill plates.Lifetime, annual contributors, and 22 year members of National Corvette Museum. Home is the beautiful Pacific Northwest.

                              Comment

                              MECF_728x90_bottom

                              Collapse
                              Working...
                              X